安科瑞养老机构智慧安全用电监测事业部
18761501329
当前位置 : 首页 » 技术支持 » 工程案例

安科瑞无线测温产品在北京大兴国际机场的应用

摘要:随着电力工业的发展,对设备的可靠性要求越来越高。在这种条件下,高压设备的无线测温系统应运而生。这种技术是将内置电池或电流感应和无线发射模块的测温传感器安装于各测温点,由于其体积小,且无需任何接线,其电气可以得到保证。传感器周期性的将测温数据无线发送至接收单元,接收单元可联网将数据送至主站,以此实现一个区域系统的电气温度监测。本文介绍了安科瑞无线测温产品在北京大兴国际机场的应用。

Abstract: With the development of the electrical industry, the requirements for the safety and reliability of equipment are getting higher and higher. Under this condition, a wireless temperature measurement system for high-voltage equipment came into being. It is to install temperature sensors with batteries or CT powered at each temperature measurement point. The sensor sends the temperature measurement data to the receiving unit, and the receiver can be connected to the system to realize the electrical temperature monitoring. This article introduces the application of Acrel wireless temperature measurement products in Beijing Daxing International Airport.
 
关键词:无线测温传感器,无线测温系统,高压柜
Keywords: Wireless Temperature Sensor, Online Temperature Monitoring System, High-voltage Switchgear
  
1.Project Overview项目概述
  北京大兴国际机场建设在北京市大兴区与河北省廊坊市广阳区之间,是超大型国际航空综合交通枢纽。该机场航站楼高压变电站分为三个部分:开闭站,指廊和核心区,其中,开闭站包括116面高压柜,指廊包括40面高压柜,核心区包括80面高压柜,以及其他配电部分包括430面高压柜。安科瑞为其提供了无线测温解决方案,每面高压柜断路器上下触头、电缆接头9点测温,共668面高压柜,无线测温传感器共计6015点。每面高压柜安装一台ASD320智能操控装置。
  As a large international transportation hub, Beijing Daxing International Airport is located between Beijing Daxing District and Guangyang District, Langfang City, Hebei Province. The airport terminal high-voltage substation includes 668 high-voltage cabinets. Acrel provided it with a wireless temperature measurement solution. The upper and lower contacts and cable joints of each high-voltage cabinet were tested at 9 points. There were a total of 6015 wireless temperature sensors. At the same time, it should be installed an ASD320 intelligent control device on each high-voltage cabinet.
 
2.Introduction of Wireless Temperature Measurement Products无线测温产品介绍
  电气接点无线测温产品适用于中低压开关柜内电缆接头、断路器触头、铜排,室内桥架、电缆,以及设备表面等场所的温度监测,及时、持续、准确反映设备运行状态,提高设备保障。
  Wireless temperature measurement products are suitable for temperature monitoring of cable joints, circuit breaker contacts, copper bars, cables, and equipment surfaces in medium-voltage and low-voltage?switchgear, and reflect the operating status of equipment in a timely, continuous and accurate manner to improve the safety on equipment.
 
3.Introduction of Acrel Wireless Temperature Measurement Solution安科瑞无线测温解决方案介绍
3.1 Solution for High-voltage and Low-voltage Switchgear (With display)
 
3.2 Solution for High-voltage and Low-voltage Switchgear (Without display)
 
3.3 Solution for High-voltage and Low-voltage Switchgear (With display)
 
4. Product Selection 产品选型
4.1 Wireless Temperature Sensor 传感器选型
 
4.2 Receiver and Display Unit接收和显示单元选型
 
5.Structure 结构图
 
 
6.Installation Photos现场图片
 
江苏安科瑞电器制造有限公司版权所有  苏ICP备08106144号-20

苏公网安备 32028102000974号

客服1 QQ1-3008028857
客服2 QQ2-3008028857
客服3 QQ3-3008028857
客服4 QQ4-3008028857